The wiring on my 2020 Reflections 295 RL was not prewired to the roof even though the brochure stated it was. I contacted GD and talked with the and all they would say is make sure the location is good and seal it well.
I measured and found the location of the sewer vent tube going from the basement through to the roof and then measured inside and drilled a small hole above the kitchen cabinets that back onto the bathroom and used a boroscope to find the best place to drill. There was some wiring running in the area around the vent pipe, I am glad I had a peek. Once I figured out where I wanted to drill I measured 300 times inside and outside then drilled the hole. All went very smoothly with the install after the hole was drilled.
I measured and found the location of the sewer vent tube going from the basement through to the roof and then measured inside and drilled a small hole above the kitchen cabinets that back onto the bathroom and used a boroscope to find the best place to drill. There was some wiring running in the area around the vent pipe, I am glad I had a peek. Once I figured out where I wanted to drill I measured 300 times inside and outside then drilled the hole. All went very smoothly with the install after the hole was drilled.
Comment