500 AMP. I just installed my inverter system and all works well except something new has started with my shunt. Before the install I had the shunt in the battery box. It is now and was then properly installed/connected. When in the battery box anytime the rig was on shore power the time remaining would read indefinite. Now, there is just dashes. Now when on battery is the only time a get a readout of time remaining.
So what did I change? the shunt now is inline with the negative cable direct from the battery and the positive wire from the shunt is on the positive cable after the shutoff rather than directly to the positive battery cable.
I've tried reading the manual, checking settings but no change. No big deal but I can't help but wonder if something is incorrect so I figured I'd post up here to people that know way more then me.
So what did I change? the shunt now is inline with the negative cable direct from the battery and the positive wire from the shunt is on the positive cable after the shutoff rather than directly to the positive battery cable.
I've tried reading the manual, checking settings but no change. No big deal but I can't help but wonder if something is incorrect so I figured I'd post up here to people that know way more then me.
Comment