Yoda is installing the much better BullRings ( https://www.bullringusa.com/ ) but I thought I'd show how to install cheap Harbor Freight versions in a Ford truck bed's anchor points. (These were installed because a certain someone didn't leave himself enough time to order and install the Bullrings.)
The six anchor points (three on each side) in the Ford bed are covered with a plastic insert that easily pops out. Unfortunately the HF anchor points didn't fill the space so IMO they looked awful when installed. What I did was carve out the needed rectangle in the plastic insert with a dremel tool and then reassembled the anchor point with the insert, then installed them. The result looks OK and works (for now). Eventually I'll get the Bullrings.
The six anchor points (three on each side) in the Ford bed are covered with a plastic insert that easily pops out. Unfortunately the HF anchor points didn't fill the space so IMO they looked awful when installed. What I did was carve out the needed rectangle in the plastic insert with a dremel tool and then reassembled the anchor point with the insert, then installed them. The result looks OK and works (for now). Eventually I'll get the Bullrings.
Comment