When putting all the stuff from our previous TT in the new 5er the shore power cord was a challenge. Having some blocking and other "stuff" on that side it was always a battle to get everything in there, and the cord is heavy enough. So I decided to build a shelf that the cord could slide under and I could still utilize the open space. Here is what it looks like.
I just used some shelving material i had laying around, the uprights need to be about 4" for the cord to fit. I made it about 3/8" away from the nautilus panel and cut the basement removeable wall to slide in. This also allows me to slide this panel out to inspect the back of the nautilus panel for leaks. I used 1 screw in the middle of the upright to attach to the front wall.
Brian
I just used some shelving material i had laying around, the uprights need to be about 4" for the cord to fit. I made it about 3/8" away from the nautilus panel and cut the basement removeable wall to slide in. This also allows me to slide this panel out to inspect the back of the nautilus panel for leaks. I used 1 screw in the middle of the upright to attach to the front wall.
Brian
Comment