I have a 2020 2970RL and after 3 trips I'm only able to lock the main door if the striker plate is removed. Any ideas?
Announcement
Collapse
No announcement yet.
Main Door striker plate
Collapse
X
-
Welcome Ifry607.
I had a similar situation on my unit. I just couldn't get it to line up correctly enough to latch. I finally took a Dremel tool to the striker and made the hole just a little bit bigger and had success.
JimJim and Ginnie
2024 Solitude 310GK - 2020 F350 Dually
GDRV Technical Forum Moderator
GDRV Rally Support Coordinator
-
Originally posted by lfry607 View PostI have a 2020 2970RL and after 3 trips I'm only able to lock the main door if the striker plate is removed. Any ideas?Dave and Sue
2020 GD 2250RK
2019 F-150 XLT, 5.0, 4WD, SB
Curt 17500 WDH, 3.55
GY Endurance, Dexter EZ Flex
SCPO(SW) USN, (Ret), HP: Tampa Bay ⚓️🇺🇸
Comment
-
You can check the striker plate lock interference by painting the striker plate with white poster paint (water based) or type writer correction fluid. Then operate the door several times and the dead bolt. You should quickly see where they are making contact. Then you will know what adjustments to make.
Hope this helps
Keith2018 Reflection 150 Series 220RK 5th whee, Star White 2022 F350 King Ranch CC Long bed (HAL) (CCC 4062lbs), B&W 25K OEM Companion,. SteadyFast system, Trailer reverse lights, rear receiver spare tire holder, storage tube, sumo springs, Victron MultiPlus 12/120/3000, Solar, Custom 6K axles upgrade, and other modifications.
- Likes 1
Comment
Comment