Originally posted by ajg617
View Post
Announcement
Collapse
No announcement yet.
Hydraulic jack retraction sequence after pressing Hitch Height?
Collapse
X
-
2018 Dodge 3500 6.7 Cummins w Aisin and 9 cup holders
2021 303RLS
Electricians were created because engineers need heroes too...
- Likes 2
-
Originally posted by Scott'n'Wendy View PostHave them show you it "testing fine" while you watch. Pressing hitch height should raise the rear four jacks and adjust the front two. If it doesn't do that...it's not "fine".2022 Solitude 310GK-R - Dual pane, factory solar, factory gen, 8K axles with discs, W/D, Heat Pump, Gen 2 Goosebox, Battleborn
2020 Ram 3500 LB SRW 4WD Crew Laramie 6.7HO Aisin
Comment
-
ajg617 When they are doing the test, measure the height from the ground to the 5er king pin plate (intentionally move it), then run the auto level, and then hitch height and MEASURE that it returns to at least CLOSE to the original height before auto level. If it's not within 1/2" either way then it fails (in my book but LCI may say different). Read the manual on the auto level and hitch height as the hitch has to be in a certain position for it to return to hitch height, I don't remember if it's low from level or high from level for it to meet the requirement to return.Joseph
Tow Vehicle: 2024 GMC K3500 Denali Ultimate Diesel
Coach: 303RLS Delivered March 5, 2021
South of Houston Texas
Comment
-
Originally posted by Jlawles2 View Postajg617 When they are doing the test, measure the height from the ground to the 5er king pin plate (intentionally move it), then run the auto level, and then hitch height and MEASURE that it returns to at least CLOSE to the original height before auto level. If it's not within 1/2" either way then it fails (in my book but LCI may say different). Read the manual on the auto level and hitch height as the hitch has to be in a certain position for it to return to hitch height, I don't remember if it's low from level or high from level for it to meet the requirement to return.2022 Solitude 310GK-R - Dual pane, factory solar, factory gen, 8K axles with discs, W/D, Heat Pump, Gen 2 Goosebox, Battleborn
2020 Ram 3500 LB SRW 4WD Crew Laramie 6.7HO Aisin
Comment
-
Originally posted by Jlawles2 View Postajg617 When they are doing the test, measure the height from the ground to the 5er king pin plate (intentionally move it), then run the auto level, and then hitch height and MEASURE that it returns to at least CLOSE to the original height before auto level. If it's not within 1/2" either way then it fails (in my book but LCI may say different). Read the manual on the auto level and hitch height as the hitch has to be in a certain position for it to return to hitch height, I don't remember if it's low from level or high from level for it to meet the requirement to return.2018 Dodge 3500 6.7 Cummins w Aisin and 9 cup holders
2021 303RLS
Electricians were created because engineers need heroes too...
Comment
-
Originally posted by TedS View Post2022 Solitude 310GK-R - Dual pane, factory solar, factory gen, 8K axles with discs, W/D, Heat Pump, Gen 2 Goosebox, Battleborn
2020 Ram 3500 LB SRW 4WD Crew Laramie 6.7HO Aisin
Comment
-
ajg617
At any time after the initial auto level, when you are set up to camp, have you ever used auto level again, to tighten the jacks up? If so this will have a negative effect on the initial hitch height setting. It may also play in to the not retracting the rear jacks.
BrianBrian & Michelle
2018 Reflection 29RS
2022 Chevy 3500HD
Comment
-
Originally posted by Country Campers View Postajg617
At any time after the initial auto level, when you are set up to camp, have you ever used auto level again, to tighten the jacks up? If so this will have a negative effect on the initial hitch height setting. It may also play in to the not retracting the rear jacks.
Brian
I too scared..... lol2018 Dodge 3500 6.7 Cummins w Aisin and 9 cup holders
2021 303RLS
Electricians were created because engineers need heroes too...
- Likes 1
Comment
-
Originally posted by Country Campers View Postajg617
At any time after the initial auto level, when you are set up to camp, have you ever used auto level again, to tighten the jacks up? If so this will have a negative effect on the initial hitch height setting. It may also play in to the not retracting the rear jacks.
Brian2022 Solitude 310GK-R - Dual pane, factory solar, factory gen, 8K axles with discs, W/D, Heat Pump, Gen 2 Goosebox, Battleborn
2020 Ram 3500 LB SRW 4WD Crew Laramie 6.7HO Aisin
Comment
-
Dealer replaced the 80amp CB. Works as it should now and doesn't exceed 70ish amps. When I press hitch height, mids retract, rears retract once the mids are up all the way, then landing gear extends.2022 Solitude 310GK-R - Dual pane, factory solar, factory gen, 8K axles with discs, W/D, Heat Pump, Gen 2 Goosebox, Battleborn
2020 Ram 3500 LB SRW 4WD Crew Laramie 6.7HO Aisin
- Likes 1
Comment
Comment