We are having problems with our living room and kitchen lights going dim. We are hooked up to shore power on our property and have our rig plugged into a Progressive EMS-PT50X. The EMS is showing 13 amps out of one leg and 3-4 amps out of the other leg but is showing no errors (reflects E0). A couple days ago, we disconnected the rig from the EMS system and plugged it directly into our 50 amp outlet - the lights were no longer dim. Two nights ago, I plugged the rig back into the EMS system. Last night, I removed the EMS system to plug the rig back directly into the 50 amp outlet and this morning, the lights are dim again. I'm not sure if we have a problem with the EMS system, if our battery is bad (it reads full inside the rig), or if our converter is bad. I originally thought it was a problem with the EMS system but having the lights dim again after being plugged directly into the 50 amp outlet all night makes me think there might be one or two issues. Any ideas?
Kristen
Kristen
Comment