Hi all,
I'm purchasing a Reflection 31MB which is 50amp and I want to install a Multiplus 2 Inverter / Charger into my system. I'm confused at the fuse panel wiring and hoping someone can shed some light.
From the inverter I have AC-OUT1 and this will go to the fuse panel, however how do I wire it at the panel when there are 2x 50amp fuse blocks.
From a diagram I gleaned online it shows:
Black = Goes to left side 50amp fuse
Red = Goes to right side 50amp fuse
Green = Goes to the Earth bus bar
White = Goes to the neutral bus bar
Does this seem right? Because I'm also seeing chatter in forums about the Multiplus 2 only powering up either left or right
The attached depicts the above and courtesy of Nate from Explorist Life (which I've bought his design) and intend to mimic in my 5th wheel. The yellow wire coming in is in fact from the Multiplus 2 from the AC-OUT1 connection
Thanks in advance
Sachin
I'm purchasing a Reflection 31MB which is 50amp and I want to install a Multiplus 2 Inverter / Charger into my system. I'm confused at the fuse panel wiring and hoping someone can shed some light.
From the inverter I have AC-OUT1 and this will go to the fuse panel, however how do I wire it at the panel when there are 2x 50amp fuse blocks.
From a diagram I gleaned online it shows:
Black = Goes to left side 50amp fuse
Red = Goes to right side 50amp fuse
Green = Goes to the Earth bus bar
White = Goes to the neutral bus bar
Does this seem right? Because I'm also seeing chatter in forums about the Multiplus 2 only powering up either left or right
The attached depicts the above and courtesy of Nate from Explorist Life (which I've bought his design) and intend to mimic in my 5th wheel. The yellow wire coming in is in fact from the Multiplus 2 from the AC-OUT1 connection
Thanks in advance
Sachin
Comment