Let me start by stating I'm not an expert on Victron Lynx setups, but I did read the manual. <gasp>
Does anyone see an issue here other than me?
I'll give a hint: this is what the owner is seeing for battery % on his display:
If you give up (and no one else has figured it out) scroll down this post to find another hint. (Don't default to looking at that hint at the bottom!!! See if you can figure it out.)
Howard
P.S. I seriously hope I missed something...after a long day and an adult beverage it is very, very possible...
Download the Lynx Shunt manual from the Victron website (the file is Lynx_Shunt_VE_Can_Manual-en.pdf ) and read section 5. System Design with special attention to paragraph 5.1.2 and the sample system on page 10.
Does anyone see an issue here other than me?
I'll give a hint: this is what the owner is seeing for battery % on his display:
If you give up (and no one else has figured it out) scroll down this post to find another hint. (Don't default to looking at that hint at the bottom!!! See if you can figure it out.)
Howard
P.S. I seriously hope I missed something...after a long day and an adult beverage it is very, very possible...
Download the Lynx Shunt manual from the Victron website (the file is Lynx_Shunt_VE_Can_Manual-en.pdf ) and read section 5. System Design with special attention to paragraph 5.1.2 and the sample system on page 10.
Comment