The on/off valve for the washing machine will not shut the water off. I was de-winterizing the trailer, turn the valve on (really shouldn't have), and now the valve will not shut the water off completely. I tried to take the enclosure out to see what I would need to do if I needed to replace it, but the lines are too tight to pull it out. I pull the handle off, and rotated the internal part of the valve 180*, but that did not work. The valve will rotate, although I did not rotate it much, just in case. As you can see, I have a temporary solution, and if needed, I will wait until the season is over to pull the bottom off.
My question is, can I pull out the internals and transfer the valve to the other side to see if that works, I would have to rotate the valve 45* in order to do that. Or if someone knows a solution?
My question is, can I pull out the internals and transfer the valve to the other side to see if that works, I would have to rotate the valve 45* in order to do that. Or if someone knows a solution?
Comment