Hydraulic Slide stopped working...not available on one control
Looking for some insight here. I have a new to me 2021 Momentum 397TH. I was in the rig doing some chores and everything functioned fine. I had run the main slides out to provide some access as normal. Then, when I went to close the slides I got NOTHING. The main slide isn't even recognized on the One Control panel. It is still there but you can't operate it. It is grayed out.
What did I check during the investigation so far?
1) the manual switch won't work. When pushed in the "In" position I can hear a click below the stairs but nothing happens.
2) I have dropped power to the rig and restarted One Control. Nothing
3) I lowered and raised the front Hydrolic levelers, so I think the hydraulic system is function.
4) I checked the DC fuses and the AC breaks and nothing looked abnormal.
5) On the one control the DV bus voltage is 13.7V, so that shouldn't be the issue.
TIA for any assistance.
Looking for some insight here. I have a new to me 2021 Momentum 397TH. I was in the rig doing some chores and everything functioned fine. I had run the main slides out to provide some access as normal. Then, when I went to close the slides I got NOTHING. The main slide isn't even recognized on the One Control panel. It is still there but you can't operate it. It is grayed out.
What did I check during the investigation so far?
1) the manual switch won't work. When pushed in the "In" position I can hear a click below the stairs but nothing happens.
2) I have dropped power to the rig and restarted One Control. Nothing
3) I lowered and raised the front Hydrolic levelers, so I think the hydraulic system is function.
4) I checked the DC fuses and the AC breaks and nothing looked abnormal.
5) On the one control the DV bus voltage is 13.7V, so that shouldn't be the issue.
TIA for any assistance.
Comment