I am trying to pull some camera video cables from the pin box into the front compartment, exactly as the 7-pin cable is run. I can see the termination of the 7-pin in the front compartment (and in the pin box), but I can’t tell what route it takes in the front frame once it leaves the pin box, or find an opening inside the front frame to do the equivalent. The 7-pin cable exits the pin box thru a hole on the port side (left, facing forward), and there is an identical hole on the starboard. I’ve tried probing with a stiff wire, and looked around a little with a cheap endoscope, but can’t find where it goes.
Does anyone know the route of the 7-pin cable with the front frame, and/or had any luck running a similar cable?
This is on a 2021 Reflection 303RLS
Thanks,
- Mark
And yes, I could mount the cables under the overhang on the outside. But that’s just ... ugly.
Does anyone know the route of the 7-pin cable with the front frame, and/or had any luck running a similar cable?
This is on a 2021 Reflection 303RLS
Thanks,
- Mark
And yes, I could mount the cables under the overhang on the outside. But that’s just ... ugly.
Comment