Not removing PEX clamps, but something similar, I had decent luck (if you have the had strength) is to crush the crimp with a pair of lineman pliers (I have 2 pair in stock just because) like trying to tighten it. After that, then I shove a small screwdriver or pick in the small gap created which loosens the clamp just enough to peel it off the tabs.
I've also, when there is room, used a pair of lineman pliers to just cut the crimp like trying to tighten it. This is hard on the pliers and hands, but extremely effective.
These are my go to for quick damage to most things: https://www.homedepot.com/p/Klein-To...76079-23-12140 I am aware of materials when using them to avoid damage.
I've also, when there is room, used a pair of lineman pliers to just cut the crimp like trying to tighten it. This is hard on the pliers and hands, but extremely effective.
These are my go to for quick damage to most things: https://www.homedepot.com/p/Klein-To...76079-23-12140 I am aware of materials when using them to avoid damage.
Comment