https://gpelectric.com/products/over...expansion-kit/
I just stumbled on what I think is a deal for this 190W expansion kit $352 verses $450 - $480 I am seeing elsewhere. I already have a GO Power 160W system and this panel would be a plug and play install Any thoughts on this. If I get 2 to add to my 160W I would be at 540 watts which should be enough for a 300ah lithium set up. Charge amps will be close to 28amp (9.3 amp each plus roughly 9 amp on the 160W panel)- just below controller rating. Go Power support said it would work The existing cabling is #4awg. total run length is about 6' to controller after panels combine (parallel) and 6' to back of distribution panel where the dealer tied in. I don't know the gauge run to the battery's from there (GD wiring)
TucsonJim I searched for the wiring load/wire size chart you have posted, and finally found it in an older post. Any chance it could be posted stand alone somewhere - maybe reference section?
Thanks for any help folks.
Keith
I just stumbled on what I think is a deal for this 190W expansion kit $352 verses $450 - $480 I am seeing elsewhere. I already have a GO Power 160W system and this panel would be a plug and play install Any thoughts on this. If I get 2 to add to my 160W I would be at 540 watts which should be enough for a 300ah lithium set up. Charge amps will be close to 28amp (9.3 amp each plus roughly 9 amp on the 160W panel)- just below controller rating. Go Power support said it would work The existing cabling is #4awg. total run length is about 6' to controller after panels combine (parallel) and 6' to back of distribution panel where the dealer tied in. I don't know the gauge run to the battery's from there (GD wiring)
TucsonJim I searched for the wiring load/wire size chart you have posted, and finally found it in an older post. Any chance it could be posted stand alone somewhere - maybe reference section?
Thanks for any help folks.
Keith
Comment