Country Campers Cate&Rob Retgw2 Jlawles2 bertschb gbkims
OK folks We still have a puzzle. The black wires stay Hot when disconnect is OFF.
With disconnect off there should be no power at the far right connection, but there is. I did confirm the top white/red stripe wire goes to the Schwintek slide controller. I checked voltage between the two black 6awg wires and grown (same as battery)
At the disconnect switch I get nothing across the terminals when off so it is working. However I see battery voltage between each connection and ground.
Now when my dealer wired in my solar panels he went directly to the distribution center and tied in (not sure how) and did not come forward to the battery. Is it possible I am seeing the solar voltage at the point with the disconnect off? Solar charger goes blank as it cant see the battery with disconnect off, but I still see battery voltage at the black wire connection. Maybe I'll check after dark. I was able to fix my front bay light. Another one of GD knife connectors went bad (cut wire). CPAP's are wired back in. All that is left is the backup lights to the relay. I am going to drop the coroplast at the two front corners to get access to the wiring I put in. However I will leave the center connected this time to make putting it back a bit easier
Tomorrow I will try and work my way to the distribution center to find out how the dealer wired in the solar panes.
Thanks
Keith
OK folks We still have a puzzle. The black wires stay Hot when disconnect is OFF.
With disconnect off there should be no power at the far right connection, but there is. I did confirm the top white/red stripe wire goes to the Schwintek slide controller. I checked voltage between the two black 6awg wires and grown (same as battery)
At the disconnect switch I get nothing across the terminals when off so it is working. However I see battery voltage between each connection and ground.
Now when my dealer wired in my solar panels he went directly to the distribution center and tied in (not sure how) and did not come forward to the battery. Is it possible I am seeing the solar voltage at the point with the disconnect off? Solar charger goes blank as it cant see the battery with disconnect off, but I still see battery voltage at the black wire connection. Maybe I'll check after dark. I was able to fix my front bay light. Another one of GD knife connectors went bad (cut wire). CPAP's are wired back in. All that is left is the backup lights to the relay. I am going to drop the coroplast at the two front corners to get access to the wiring I put in. However I will leave the center connected this time to make putting it back a bit easier
Tomorrow I will try and work my way to the distribution center to find out how the dealer wired in the solar panes.
Thanks
Keith
Comment