Right Side fender skirt

[ncitro]

Yoda Go through customer service, they will put you in touch with someone in parts.

[Yoda]

Thanks for the information. I made temporary repairs yesterday and got it back on. Ill send customer service an email and inquire, or should I go through the rally folks?
Thanks everyone for the help.
Keith

BTW - I am more than willing to pay for them there - it avoids the huge shipping costs.

[familytruckster4]

I would be willing to bet that they will deliver it to the rally, you probably wont even have to ask nicely. When we went in 21 they had an entire building near the area B side that was full of parts they were delivering and installing.

[ncitro]

Yoda You would have to have put it in your rally registration at the time you signed up, but more recently they have been focusing on recall and safety issues. If you want to pick it up contact Grand Design and that can be arranged. The rally is close to the factory, it should be simple to run up there and pick it up from the factory. They might even deliver it to you at the rally if you ask.

[Yoda]

If you go to the national rally in Elkhart, they will typically replace fender skirts while you're there.

Jim

I know this is an old thread, but if they do it will save me a lot of grief over braking one yesterday. I already filled out my work request at registration - any info how I would go about this, even just to buy the parts there?

Thanks Jim
Keith

[TucsonJim]

If you go to the national rally in Elkhart, they will typically replace fender skirts while you're there.

Jim

[Country Campers]

Unfortunately the only other option is to pick it up near the factory. There are also dealers near the factory that sell discontinued parts and they may have the same or similar part that you need.

Brian

[Jeff Barta]

My right side fender skirt cracked while in storage this winter. I called the GD dealer figuring about $125-$150 for it. I was surprised when the price was $110. Then he hit me with the shock,, shipping is $150. Are there any other options out there? The small plastic fuel door cost me $22 in shipping, price for the part is $28.