That is a good DIY idea. I use this:
https://www.amazon.com/dp/B00HSO37B0...1HBRF&psc=1&re...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.3772 seconds.
Keywords
Members
Tags
-
-
After chocking the trailer wheels, I put the truck in neutral and let it float until there is no fore/aft load on the hitch jaws. (Then, remember to apply...
Leave a comment:
-
I do not think the hitch would cause any extra stress on that jack. It is interesting that the front street side jack is bad on yours. I seen this same...
Leave a comment:
-
Definitely block your wheels up. For one thing the rig will be much more stable inside, but the frame is meant to be supported by the axles, you want...
Leave a comment:
-
Ok guys - I got a shirt muddy talking these photos for you: https://www.amazon.com/photos/shared...w_fLPmCr1aMi18
I checked to see if I saved the...Last edited by ScottK; Today, 05:15 PM.
Leave a comment:
-
OneControl Limitations, Or Is It Just Me?
Our Solitude has the Lippert OneControl touch panel, and I'm beginning to question its usefulness. I'm hoping someone has some thoughts:- We purchased
-
Another thought: I am already putting two 850# motorcycles in the garage. If the smart car only adds another 200# I can offset that by packing the rest...
- Likes 1
Leave a comment:
-
I know my 16 cu ft double door Furrion has an off grid setting too but I dont like the 40* temps in that mode. Too warm. I run mine down to 32* in the...
- Likes 1
Leave a comment:
-
Gotcha. Thanks. I've seen mixed opinions on whether lifting the wheels is good or bad. We only boondock and often park in very unlevel spots. My wheels...
Leave a comment:
-
By your reference to gib rivets I’m guessing this is a schwintek slide out. I had this exact thing happen on my previous trailer. I was out of warranty....
Leave a comment:
-
I do. Still seems to pull up on the truck some before it releases.
Leave a comment:
-
I wouldn't think the hitch matters. You do chock the wheels before unhitching, don't you?
Leave a comment:
-
Got to our Workamping gig in Michigan today. Lifted camper off hitch then started manually lowering and boom. Failed. New one ordered and on the way....
Leave a comment:
-
I would recommend a inverter with a built in transfer switch (I am partial to Victron but there are other options) then I would put this inverter between...
Leave a comment:
-
We often use the Lane levelers to even out right to left. I have often found when the 5th wheel pin doesn't want to release, simply putting the truck...
- Likes 1
Leave a comment:
Leave a comment: